TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 336 of 1170
11-64. GUNNER'S PLATFORM ASSEMBLY MAINTENANCE This task covers: a. Disassembly b. Assembly INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 111) Four locknuts (Appendix G, Item 109) Two locknuts (Appendix G, Item 110) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-24P Equipment Condition • Gunner’s platform removed (para. 11-63). • Gunner’s platform assembly removed (para. 11-65). TM 9-2320-280-20-3 11-86 Change 2 a. Disassembly 1. Remove two locknuts (5), washers (4), shoulder bolts (2), and outer risers (3) from rear mounting bracket (6). Discard locknuts (5). 2. Remove riser assembly (1) from front mounting bracket (7). 3. Remove two locknuts (9), washers (10), capscrews (17), spacers (12), outer risers (3), and latches (18) from inner risers (11). Discard locknuts (9). 4. Remove two locknuts (13), washers (14), capscrews (16), and two pin-and-lanyard assemblies (15) from outer risers (3). Discard locknuts (13). 5. Remove four locknuts (24), washers (23), capscrews (19), and inner risers (11) from stiffener plate (8). Discard locknuts (24). 6. Remove two locknuts (20), washers (21), and guide pin bolts (22) from inner risers (11). Discard locknuts (20).