TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 332 of 1170
11-61. ARMAMENT MOUNTING ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove pin (7) and adapter (3) from armament mounting assembly (4). 2. Remove six locknuts (5), washers (1), capscrews (2), washers (1), armament mounting assembly (4), and spacers (6), if installed, from weapon station (8). Discard locknuts (5). INITIAL SETUP: Applicable Models M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 128) Manual References TM 9-2320-280-24P b. Installation 1. Install six spacers (6), if removed, and armament mounting assembly (4) on weapon station (8) with six washers (1), capscrews (2), washers (1), and locknuts (5). Tighten locknuts (5) to 37 lb-ft (50 N•m). 2. Install adapter (3) on armament mounting assembly (4) with pin (7). TM 9-2320-280-20-3 11-82 Change 2 NOTE • Note locations of capscrews for installation. • Later production vehicles are equipped with a spacer.