Sign up to sell your inventory with NSN Lookup

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 326 of 1170

11-76 Change 2 INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2, M1123 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four locknuts (Appendix G, Item 86) Manual References TM 9-2320-280-24P 11-55. TURRET HANDLE REPLACEMENT This task covers: a. Removal b. Installation Remove four locknuts (4), washers (2), capscrews (1), washers (2), and turret handle (3) from weapon station tray (5). Discard locknuts (4). a. Removal Install turret handle (3) on weapon station tray (5) with four washers (2), capscrews (1), washers (2), and locknuts (4). b. Installation TM 9-2320-280-20-3 NOTE • Fabrication instructions are available to replace the turret handle. Refer to appendix D (fig. D-95). • The following procedure is for replacement of turret handle that has been previously removed and installed in accordance with the fabrication instructions.