TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 323 of 1170
11-52. HINGE PIVOT BRACKET AND GUNNER'S SLING REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove locknut (8), washer (2), capscrew (3), washer (2), gunner’s sling (9), and hinge pivot bracket (6) from weapon station (1). Discard locknut (8). 2. Remove capscrew (4), washer (5), and hinge pivot bracket (6) from weapon station (1) and rear hinge pin (7). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Locknut (Appendix G, Item 128) Manual References TM 9-2320-280-24P b. Installation 1. Install hinge pivot bracket (6) on rear hinge pin (7). 2. Install hinge pivot bracket (6) on weapon station (1) with washer (5) and capscrew (4). Tighten capscrew (4) to 37 lb-ft (50 N•m). 3. Install hinge pivot bracket (6) and gunner’s sling (9) on weapon station (1) with washer (2), capscrew (3), washer (2), and locknut (8). Tighten locknut (8) to 37 lb-ft (50 N•m). TM 9-2320-280-20-3 Change 2 11-73