TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 320 of 1170
11-70 Change 2 Materials/Parts Four spring tension washers (Appendix G, Item 320) Sealing compound (Appendix C, Item 40) Manual References TM 9-2320-280-24P 11-49. WEAPON STATION TRAY LEVER REPLACEMENT This task covers: a. Removal b. Installation Remove capscrew (4), washer (3), two spring tension washers (2), tray lever (1), two spring tension washers (2), and washer (3) from weapon station (5). Discard spring tension washers (2). a. Removal NOTE Apply sealing compound to threads on capscrew. Install washer (3), two spring tension washers (2), and tray lever (1) on weapon station (5) with two spring tension washers (2), washer (3), and capscrew (4). Tighten capscrew (4) to 6 lb-ft (8 N•m). b. Installation TM 9-2320-280-20-3 INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2, M1123 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1)