TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 32 of 1170
10-11. FRONT HOOD SCREEN REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove three nuts (7), washers (6), and carriage bolts (8) from front hood screen (5) and hood (1). 2. Remove three capscrews (2), harness clamps (3), washers (4), and front hood screen (5) from hood (1). INITIAL SETUP: Applicable Models M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealant (Appendix C, Item 38) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). b. Installation FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). TM 9-2320-280-20-3 10-16 Change 1 1. Apply sealant to threads of capscrews (2). 2. Install front hood screen (5) on hood (1) with three washers (4), harness clamps (3), and capscrews (2). Tighten capscrews (2) to 20-30 lb-in. (2-3 N•m). 3. Secure front hood screen (5) to hood (1) with three carriage bolts (8), washers (6), and nuts (7). Tighten nuts (7) to 21 lb-ft (29 N•m).