TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 318 of 1170
TM 9-2320-280-20-3 11-47. WEAPON STATION TRAY SEAL REPLACEMENT This task covers: a. Removal b. Installation INITAL SETUP: Applicable Models Materials/Parts All models except M996, M996A1, M997, Adhesive (Appendix C, Item 3) M997A1 M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, Manual References M1042, M1097, M1097A1, M1097A2 TM 9-2320-280-24P Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) 1. Remove seal (1) from weapon station (2). 2. Thoroughly clean the edge of weapon station (2). 1. Measure and cut required length of seal (1). 2. Apply a 1/16-in. (1.6 mm) to 1/8-in. (3.2 mm) bead of adhesive to seal (1) lip. 3. Starting somewhere other than at a corner, press seal over the lip of the weapon station (2) tray hatch opening. 4. Allow seal (1) to set and cure undisturbed, for about one hour. 11-68