TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 317 of 1170
11-46. WEAPON STATION HATCH HOLDDOWN STRIKER REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two locknuts (5), washers (4), screws (1), and holddown striker (2) from bracket (3). Discard locknuts (5). 2. Remove two locknuts (7), washers (8), capscrews (9), washers (8), and bracket (3) from left hatch panel (6). Discard locknuts (7). NOTE This task covers the left hatch panel holddown striker. The right hatch panel holddown striker is mounted directly on the panel. INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Two locknuts (Appendix G, Item 107) Manual References TM 9-2320-280-24P b. Installation 1. Install striker (2) on bracket (3) with two screws (1), washers (4), and locknuts (5). 2. Install bracket (3) on left hatch panel (6) with two washers (8), capscrews (9), washers (8), and locknuts (7). Tighten locknuts (7) to 6 lb-ft (8 N•m). TM 9-2320-280-20-3 Change 2 11-67