TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 313 of 1170
11-43. WEAPON STATION HATCH HANDLE REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two locknuts (1), washers (2), capscrews (5), large washers (4), and handle (6) from hatch (3). Discard locknuts (1). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 107) Manual References TM 9-2320-280-24P b. Installation Install handle (6) on hatch (3) with two large washers (4), capscrews (5), washers (2), and locknuts (1). Tighten locknuts to 6 lb-ft (8 N•m). TM 9-2320-280-20-3 Change 2 11-63