TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 31 of 1170
10-10. CENTER HOOD STOP GUIDE REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove six locknuts (5), washers (2), capscrews (1), washers (2), two guide plates (3), and guide brackets (4) from hood (6). Discard locknuts (5). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 70) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation Install two guide plates (3) and guide brackets (4) on hood (6) with six washers (2), capscrews (1), washers (2), and locknuts (5). Tighten locknuts (5) to 10 lb-ft (14 N•m). FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 10-15