TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 296 of 1170
11-29. CARGO SHELL DOOR GAS SPRING MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two locknuts (9), washers (1), capscrews (2), and washers (1) from bracket (3) and wheelhouse (6). Discard locknuts (9). 2. Remove two locknuts (8), washers (4), backing plate (7), capscrews (5), washers (4), and bracket (3) from wheelhouse (6). Discard locknuts (8). Remove tape from bracket (3) and discard tape. INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Tape (Appendix C, Item 50) Four locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equiment Condition • Tailgate lowered (TM 9-2320-280-10). • Gas spring removed (para. 11-21). b. Installation 1. Apply tape to bracket (3) mounting surfaces. Install bracket (3) on wheelhouse (6) with two washers (4), capscrews (5), backing plate (7), washers (4), and locknuts (8). Tighten locknuts (8) to 8 lb-ft (11 N•m). 2. Secure bracket (3) to wheelhouse (6) with two washers (1), capscrews (2), washers (1), and locknuts (9). Tighten locknuts (9) to 8 lb-ft (11 N•m). TM 9-2320-280-20-3 Change 2 11-47 FOLLOW-ON TASKS: • Install gas spring (para. 11-21). • Raise and secure tailgate (TM 9-2320-280-10).