TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 295 of 1170
11-28. CARGO SHELL DOOR DOVETAIL SPRING REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove locknut (8), lockwasher (7), washer (6), cup (9), spring (3), locknut (2), retainer (10), and head bolt (1) from cargo shell dovetail (5). Discard locknuts (2) and (8) and lockwasher (7). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 101) Lockwasher (Appendix G, Item 178) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Rear end of cargo shell door raised (TM 9-2320-280-10). • Tailgate lowered (TM 9-2320-280-10). b. Installation 1. Install retainer (10) and locknut (2) on head bolt (1) and position locknut (2) to end of threads on head bolt (1). 2. Install cup (9) and head bolt (1) on dovetail (5). 3. Lower cargo door. 4. Hold locknut (2) and adjust head bolt (1) up until head bolt (1) touches bottom of cargo door (4). 5. Raise cargo door. 6. Remove head bolt (1) from dovetail (5). 7. Install spring (3), cup (9), and head bolt (1) on dovetail (5) with washer (6), lockwasher (7), and locknut (8). Tighten locknut (8) to 55 lb-ft (75 N•m). TM 9-2320-280-20-3 11-46 Change 2 FOLLOW-ON TASKS: • Close cargo shell door (TM 9-2320-280-10). • Raise and secure tailgate (TM 9-2320-280-10).