TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 294 of 1170
11-27. CARGO SHELL DOOR REAR STRIKER MOUNTING PLATE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove locknut (5), washer (4), and socket head screw (2) from striker mounting plate (3) and wheelhouse (8). Discard locknut (5). 2. Remove five locknuts (6), washers (7), capscrews (1), washers (9), and striker mounting plate (3) from wheelhouse (8). Discard locknuts (6). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2 M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 128) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Rear striker removed (para. 11-26). • Cargo shell door strap removed (left side only) (para. 11-22). b. Installation 1. Install striker mounting plate (3) on wheelhouse (8) with five washers (9), capscrews (1), washers (7), and locknuts (6). 2. Secure striker mounting plate (3) to wheelhouse (8) with socket head screw (2), washer (4), and locknut (5). Tighten locknuts (5) and (6) to 25-30 lb-ft (34-41 N•m). FOLLOW-ON TASKS: • Install cargo shell door strap (left side only) (para. 11-22). • Install rear striker (para. 11-26). TM 9-2320-280-20-3 Change 2 11-45