TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 293 of 1170
11-26. CARGO SHELL DOOR REAR STRIKER REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove locknut (4), washer (3), striker (1), and spacer (2) from striker plate (6) and wheelhouse (5). Discard locknut (4). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Locknut (Appendix G, Item 105) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Tailgate lowered (TM 9-2320-280-10). • Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation Install spacer (2) and striker (1) on striker plate (6) and wheelhouse (5) with washer (3) and locknut (4). Tighten locknut (4) to 190-210 lb-ft (258-285 N•m). FOLLOW-ON TASKS: • Raise and secure tailgate (TM 9-2320-280-10). • Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 11-44 Change 2