TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 290 of 1170
11-23. CARGO SHELL DOOR SEAL PROTECTOR REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove thirteen locknuts (4), washers (5), capscrews (2), washers (5), and seal protector (1) from cargo door (3). Discard locknuts (4). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1,M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Thirteen locknuts (Appendix G, Item 70) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation Install seal protector (1) on cargo door (3) with thirteen washers (5), capscrews (2), washers (5), and locknuts (4). Tighten locknuts (4) to 85-100 lb-in. (10-12 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-41