TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 289 of 1170
11-22. CARGO SHELL DOOR STRAP REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two assembled washer screws (3), footman loop (2), and strap (1) from cargo door (4). Discard assembled washer screws (3). 2. Remove locknut (5), washer (6), capscrew (7), and strap (1) from left striker mounting plate (8). Discard locknut (5). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Par ts Locknut (Appendix G, Item 128) Two assembled washer screws (Appendix G, Item 279) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation 1. Install strap (1) on left striker mounting plate (8) with capscrew (7), washer (6), and locknut (5). Tighten locknut (5) to 25-30 lb-ft (34-41 N•m). 2. Install strap (1) and footman loop (2) on cargo door (4) with two assembled washer screws (3). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 11-40 Change 2 NOTE To assist closing cargo shell door, a grab loop may be added. Refer to appendix D, figure D-83.