TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 283 of 1170
11-20. CARGO SHELL DOOR RETENTION CABLE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove locknut (1), washer (2), shoulder bolt (4), and spring end of cable (5) from cargo door bracket (3). Discard locknut (1). 2. Remove locknut (8), washer (9), shoulder bolt (6), and cable (5) from left cargo shell bracket (7). Discard locknut (8). NOTE It will be necessary to lower cargo shell door slightly to relieve cable tension during step 1. INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Forward end of cargo shell door raised (TM 9-2320-280-10). b. Installation 1. Install cable (5) on cargo shell bracket (7) with shoulder bolt (6), washer (9), and locknut (8). Tighten locknut (8) to 85-110 lb-in. (10-12 N•m). 2. Install spring end of cable (5) on cargo door bracket (3) with shoulder bolt (4), washer (2), and and locknut (1). Tighten locknut (1) to 85-110 lb-in. (10-12 N•m). TM 9-2320-280-20-3 11-34 Change 2 FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).