TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 278 of 1170
11-17. CARGO SHELL DOOR LATCH MAINTENANCE This task covers: a. Removal c. Adjustment b. Installation a. Removal 1. Remove push on nut (6), rod end clip (7), and rod (8) from door latch (4). Discard push on nut (6). 2. Remove three nuts (1), lockwashers (2), capscrews (5), and door latch (4) from cargo door (3). Discard lockwashers (2). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) b. Installation Install door latch (4) on cargo door (3) with three capscrews (5), lockwashers (2), and nuts (1). Do not tighten nuts (1) all the way. c. Adjustment 1. Loosen three nuts (1) from door latch (4) and cargo door (3). 2. Close cargo door (3) ensuring latch (4) is fully engaged on door striker pins (9). 3. Tighten three nuts (1) to 17 lb-ft (23 N•m). 4. Install rod (8) on latch (4) with rod end clip (7) and push on nut (6). FOLLOW-ON TASKS: • Lubricate door latch (TM 9-2320-280-10). • Check cargo shell door for proper operation (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-29 Materials/Parts Three lockwashers (Appendix G, Item 134) Push on nut (Appendix G, Item 228) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10).