TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 277 of 1170
11-16. CARGO SHELL DOOR HANDLE LATCH REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove four nuts (4), washers (3), capscrews (5), and washers (3) from handle latch lock (1) and cargo door (2). 2. Pull handle latch (1) out and down until latch rods (6) are visible. 3. Remove two push on nuts (9), rod end clips (7), latch rods (6), and handle latch (1) from pivot arms (8). Discard push on nuts (9). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) b. Installation 1. Position handle latch (1) to cargo door (2) until latch rods (6) can be connected to handle latch pivot arms (8) and secure latch rods (6) on pivot arms (8) with two rod end clips (7) and push on nuts (9). 2. Install handle latch (1) on cargo door (2) with four washers (3), capscrews (5), washers (3), and nuts (4). FOLLOW-ON TASK: Check cargo shell door for proper operation (TM 9-2320-280-10). TM 9-2320-280-20-3 11-28 Change 2 Materials/Parts Two push on nuts (Appendix G, Item 228) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Forward end of cargo shell door raised (TM 9-2320-280-10).