TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 276 of 1170
11-15. CARGO SHELL DOOR GRAB HANDLE REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove four nuts (1), lockwashers (2), washers (3), countersunk screws (6), and grab handle (5) from cargo door (4). Discard lockwashers (3). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) b. Installation 1. Apply sealing compound to threads of countersunk screw (6). 2. Install grab handle (5) on cargo door (4) with four countersunk screws (6), washers (3), lockwashers (2), and nuts (1). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-27 Materials/Parts Sealing compound (Appendix C, Item 45) Four lockwashers (Appendix G, Item 173) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Forward end of cargo shell door raised (TM 9-2320-280-10).