TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 275 of 1170
11-14. CARGO SHELL DOOR WIRE HANDLE LOCK REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two push on nuts (1), rod end clips (2), and latch rods (3) from wire handle lock pivot arms (4). Discard push on nuts (1). 2. Remove four nuts (5), washers (6), capscrews (8), washers (6), and wire handle lock (9) from cargo door (7). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealing compound (Appendix C, Item 45) Two push on nuts (Appendix G, Item 228) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Tailgate lowered (TM 9-2320-280-10). b. Installation 1. Apply sealing compound to threads of capscrews (8). 2. Install wire handle lock (9) on cargo door (7) with four washers (6), capscrews (8), washers (6), and nuts (5). 3. Install two latch rods (3) on wire handle lock pivot arms (4) with rod end clips (2) and push on nuts (1). FOLLOW-ON TASKS: • Raise and secure tailgate (TM 9-2320-280-10). • Check cargo shell door for proper operation (TM 9-2320-280-10). TM 9-2320-280-20-3 11-26 Change 2