TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 268 of 1170
11-12. BALLISTIC CREW DOOR LATCH TUBE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove lockbolt (9), wave washer (8), latch tube (7), and washer (3) from latch arm (4). Discard lockbolt (9). 2. Remove four screws (6), washers (5), and bracket (1) from side rails (2). Discard screws (6). 3. Remove two screws (12), washers (13), and guide (11) from bracket (1). 4. Slide latch tube (7) out of bracket (1). 5. Remove protector (10) from bracket (1). INITIAL SETUP: Applicable Models All models except M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Lockbolt (Appendix G, Item 68) Four screws (Appendix G, Item 282) Manual References TM 9-2320-280-24P b. Installation 1. Install protector (10) on bracket (1). 2. Slide latch tube (7) into bracket (1). 3. Install guide (11) on bracket (1) with two washers (13) and screws (12). 4. Install bracket (1) on side rails (2) with four washers (5) and screws (6). 5. Install washer (3) and latch tube (7) on latch arm (4) with wave washer (8) and lockbolt (9). Tighten capscrew (9) to 6 lb-ft (8 N•m). TM 9-2320-280-20-3 Change 2 11-19