TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 267 of 1170
11-11. BALLISTIC CREW DOOR LATCH REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove clevis clip (6) and hook (7) from paddle lock (10) and disconnect hook (7) from door latch (14). 2. Disconnect spring (13) from top of latch (14). 3. Remove lockbolt (1), wave washer (2), latch tube (3), and washer (4) from latch arm (5). Discard lockbolt (1). 4. Remove four locknuts (15), washer (8), screws (9), latch (14), and spacer (12) from crew door (11) Discard locknuts (15). INITIAL SETUP: Applicable Models All models except M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Lockbolt (Appendix G, Item 68) Four locknuts (Appendix G, Item 87) Manual References TM 9-2320-280-24P b. Installation 1. Install spacer (12) and latch (14) on crew door (11) with four washers (8), screws (9), and locknuts (15). Tighten locknuts (15) to 6 lb-ft (8 N•m). 2. Connect spring (13) to top of latch (14). 3. Install washer (4) and latch tube (3) on latch arm (5) with wave washer (2) and lockbolt (1). Tighten lockbolt (1) to 6 lb-ft (8 N•m). 4. Install hook (7) on latch (14) and connect other end of hook (7) to paddle lock (10) with clevis clip (6). TM 9-2320-280-20-3 11-18 Change 2