TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 265 of 1170
11-9. BALLISTIC CREW DOOR WINDOW STOP REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two locknuts (2), screws (5), washers (4), and window stop bracket (6) from side rail (3). Discard locknuts (2). 2. Remove locknut (7), washer (8), screw (1), and pad (9) from window stop bracket (6). Discard locknut (7). CAUTION If both window stops are being replaced, ensure ballistic window is locked in the full up position to prevent damage to window. INITIAL SETUP Applicable Models All models except M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 87) Locknut (Appendix G, Item 88) Manual References TM 9-2320-280-24P b. Installation 1. Install pad (9) on window stop bracket (6) with screw (1), washer (8), and locknut (7). 2. Install window stop bracket (6) on side rail (3) with two washers (4), screws (5), and locknuts (2). TM 9-2320-280-20-3 11-16 Change 2