TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 261 of 1170
11-7. BALLISTIC CREW DOOR WINDOW ASSEMBLY MAINTENANCE This task covers: a. Removal c. Assembly b. Disassembly d. Installation a. Removal Pull out on window latch knob (4) and slide window (5) down and out from door side rails (1) and guide channel (2). INITIAL SETUP: Applicable Models All models except M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 T ools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealing compound (Appendix C, Item 43) Retaining ring (Appendix G, Item 231) Manual References TM 9-2320-280-24P Equipment Condition • Window stops removed (para. 11-9). • Latch tube removed (para. 11-12). d. Installation Align window latch (3) with window guide channel (2) and push window (5) up into guide channel (2) and door side rails (1). b. Disassembly 1. Remove latch knob (4) from pin (6). 2. Remove retaining ring (9), pin (6), and spring (10) from window latch (3). Discard retaining ring (9). 3. Remove four rollers (8) from guide pins (7). 4. Remove four guide pins (7) from window (5). c. Assembly 1. Apply sealing compound to threads of guide pins (7) and install guide pins (7) on window (5) frame. 2. Install spring (10) and pin (6) on window latch (3) with retaining ring (9). 3. Apply sealing compound to threads of pin (6) and install latch knob (4) onto pin (6). 4. Install four rollers (8) on guide pins (7). TM 9-2320-280-20-3 11-12 Change 2