TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 257 of 1170
TM 9-2320-280-20-3 11-8 Change 2 11-3. BALLISTIC CREW DOOR HINGE REPLACEMENT This task covers: a. Removal b. Installation Materials/Parts Three locknuts (Appendix G, Item 87) Manual References TM 9-2320-280-24P Equipment Condition Ballistic crew door removed (para. 11-2). a. Removal Remove three locknuts (5), washers (2), screws (1), washers (2), hinge (3), and shim(s) (4) from crew door (6). Discard locknuts (5). b. Installation Install shim(s) (4) and hinge (3) on crew door (6) with three washers (2), capscrews (1), washers (2), and locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N • m). NOTE • M966, M966A1, M996, M996A1, M997, M997A1, M997A2, M1025, M1025A1, M1025A2, M1026, M1026A1, and M1036 vehicles have one additional hinge shim on the inner door side of each door hinge mounting hardware. • On top hinges, note position of doorstop bracket. FOLLOW-ON TASK: Install ballistic crew door (para. 11-2). INITIAL SETUP: Applicable Models All models except M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1)