TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 25 of 1170
TM 9-2320-280-20-3 10-5. HOOD AND HINGE REPLACEMENT (Cont’d) c. Alignment 1. Lower hood (4) and check alignment of hood stop guide (3) with center hood stop (2) on “A” pillar (1), and hood catch (5) with body latch (6). NOTE Upper and lower hinge halves contain slotted mounting holes to allow for adjustment. 2. With hood (4) lowered and secured and alignment correct, tighten four lower hinge half attaching locknuts (7) to 60 lb-ft (81 Nom). NOTE After hood alignment is completed, some contact may occur between hood and left mirror bracket. If contact exists, use file and trim about 1/4 in. (6.4 mm) off left comer and edge of hood. Trim until hood closes without hitting left mirror bracket. Touch up trim with paint (refer to TM 43-0139). FOLLOW-ON TASKS: . ● Lower and secure hood (TM 9-2320-280-10). Connect battery ground cable (para. 4-73). 10-10