TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 24 of 1170
3. Install two upper hinge halves (14) on hood (15) with four washers (3) and capscrews (4). Tighten capscrews to 28 lb-ft (38 N•m). 4. Install hood (15) and align two upper hinge halves (14) with lower hinge halves (12). 5. Secure two upper hinge halves (14) to lower hinge halves (12) with washers (2), hinge pins (13), washers (2), and cotter pins (1). 6. Connect connector plug (11) to connector receptacle (7). 7. Install washer (18) and hood prop rod (19) on hood (15) with washer (18) and cotter pin (17). 10-5. HOOD AND HINGE REPLACEMENT (Contd) TM 9-2320-280-20-3 Change 1 10-9