TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 238 of 1170
10-112. FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP TM 9-2320-280-20-3 Change 2 10-193 Applicable Models All vehicles except M996, M996A1, M997, M997A1, M997A2, M1035, M1035A1, M1035A2 Tools General mechanics tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-24P General Safety Instructions Winch must be supported during removal and installation. WARNING Winch must be supported during removal and installation. Failure to support winch may result in injury to personnel or damage to equipment. 1. Remove four retaining rings (11), two shafts (3), and rollers (5) from bracket (4). 2. Remove four retaining rings (6), two shafts (10), and rollers (7) from bracket (4). 3. Remove two capscrews (8), washers (9), and bracket (4) from bumper (1) and winch (2). 1. Install bracket (4) on bumper (1) and winch (2) with two washers (9) and capscrews (8). Tighten capscrews (8) to 35 lb-ft (47 N•m). 2. Install two rollers (7) and shafts (10) in bracket (4) with four retaining rings (6). 3. Install two rollers (5) and shafts (3) in bracket (4) with four retaining rings (11). b. Installation a. Removal 1 2 3 4 5 6 7 8 10 6 11 9