Sign up to sell your inventory with NSN Lookup

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 229 of 1170

TM 9-2320-280-20-3 10-186.6 Change 2 10-108.1. 10,500 LB HYDRAULIC WINCH AND BRACKETS REPLACEMENT (Cont'd) NOTE If tube assembly is installed, perform step 4. 4. Disconnect tube assembly (16) from hydraulic hose assemblies (1) and (4). 5. Connect hydraulic hose assembly (4) to elbow (3) on top winch inlet port on winch (15). 6. Connect hydraulic hose assembly (1) to elbow (2) on bottom winch outlet port on winch (15). 7. Install hydraulic hose assemblies (1) and (4) on winch and bumper assembly (15) with two clamps (12), capscrew (11), washer (13), locknut (14). 8. Connect controller plug lead 758B (6) to lead wire 785B (5). 9. Connect controller plug lead 758A (8) to winch lead 758A (7). 10. Connect controller plug lead 758C (10) to winch lead 758C (9).