TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 200 of 1170
10-100. REAR BOW PIVOT BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two locknuts (6), washers (5), capscrews (1), washers (2), bow pivot bracket (3), and plate (7) from body (4). Discard locknuts (6). INITIAL SETUP: Applicable Models M998, M998A1, M1035, M1035A1, M1035A2, M1038, M1038A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Bows removed (TM 9-2320-280-10). b. Installation Install plate (7) and bow pivot bracket (3) on body (4) with two washers (2), capscrews (1), washers (5), and locknuts (6). Align bow pivot bracket (3) flush with side of body (4) and tighten two locknuts (6) to 6 lb-ft (8 N•m). FOLLOW-ON TASK: Install bows (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 10-169 1 2 3 4 5 6 7