TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 198 of 1170
10-98. “A” PILLAR FORMER ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove thirteen screws (3) and “A” pillar former (2) from “A” pillar (1). 2. Clean weatherstrip from “A” pillar (1). 3. Inspect turnbutton stud (4) for damage. Replace if damaged. INITIAL SETUP: Applicable Models M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Turnbutton stud (Appendix G, Item 303) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Soft top removed (TM 9-2320-280-10). b. Installation 1. Peel backing paper from “A” pillar former (2). 2. Install “A” pillar former (2) on “A” pillar (1) with thirteen screws (3). FOLLOW-ON TASK: Install soft top (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 10-167