TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 156 of 1170
10-82. REARVIEW MIRROR MAINTENANCE Remove two capscrews (3), lockwashers (4), washers (5), upper mounting bracket (1), lower mounting bracket (6), and mirror assembly (2) from windshield frame (7). Discard lockwashers (4). NOTE For inspection and removal of blind rivet or insertnut, refer to para. 10-66. Inspect blind rivet or insertnut (8) for damage. Replace with insertnut if damaged. b. Inspection This task covers: a. Removal d. Assembly b. Inspection e. Installation c. Disassembly INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Three locknuts (Appendix G, Item 128) Four lockwashers (Appendix G, Item 134) Two locknuts (Appendix G, Item 79) Manual References TM 9-2320-280-24P NOTE Left and right rearview mirror removal procedures are basically the same. However, the left side rearview mirror upper mounting bracket may be mounted on the top (All A2 Series or M1123) or bottom (Basic/A1 Series) of the mirror assembly. This procedure covers the left rearview mirror. a. Removal TM 9-2320-280-20-3 Change 2 10-133 2 8 7 ~ 1 4 5 3 6