TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 154 of 1170
10-80. MIRROR ARM ASSEMBLY REPLACEMENT Manual References TM 9-2320-280-24P Equipment Condition Mirror removed (para. 10-79). This task covers: a. Removal b. Installation a. Removal 1. Remove special nut (1), lockwasher (2), and washer (3) from pivot bracket (4) and mounting bracket (5). Discard lockwasher (2). 2. Remove mirror arm (7), pivot bracket (4), and flat washer (6) from mounting bracket (5). Discard flat washer (6). 3. Remove nut (10), lockwasher (11), capscrew (8), two spacers (9), and mirror arm (7) from pivot bracket (4). Discard lockwasher (11). b. Installation 1. Install two spacers (9) and mirror arm (7) on pivot bracket (4) with capscrew (8), lockwasher (11), and nut (10). Tighten nut (10) to 15 lb-ft (20 N•m). 2. Install flat washer (6), pivot bracket (4), and mirror arm (7) on mounting bracket (5) with washer (3), lockwasher (2), and special nut (1). FOLLOW-ON TASK: Install mirror (para. 10-79). TM 9-2320-280-20-3 Change 2 10-131 INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Lockwasher (Appendix G, Item 134) Lockwasher (Appendix G, Item 133) Flat washer (Appendix G, Item 39) 1 2 3 4 5 6 7 8 4 11 10 7 9