TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 149 of 1170
10-76. WINDSHIELD WASHER HOSES REPLACEMENT INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). This task covers: a. Removal b. Installation a. Removal 1. Remove nut (18), washer (4), capscrew (5), and washer (4) from clamp (3), and remove washer hose (1) from body hood rail (13). 2. Remove two nuts (11), washers (10), capscrews (16), and washers (10) from clamps (9), and remove washer hose (12) from top of body hood rail (13). 3. Loosen clamp (14) and disconnect washer hose (12) from pump (15) and tee (6), and remove through clamp (17). 4. Disconnect washer hose (7) from tee (6) and nozzle (8) and remove through clamp (17). 5. Disconnect washer hose (1) from tee (6) and nozzle (2) and remove through clamp (17). b. Installation 1. Install washer hose (1) through clamp (17) and connect to nozzle (2) and tee (6). 2. Install washer hose (7) through clamp (17) and connect to nozzle (8) and tee (6). 3. Install washer hose (12) through clamp (17) and connect to tee (6) and pump (15) and tighten clamp (14). NOTE When mounting the clamps, ensure they are positioned below the hood rest, so when the hood is closed it does not interfere with the clamps or hose. 4. Install washer hose (1) on body hood rail (13) and secure with clamp (3), washer (4), capscrew (5), washer (4), and nut (18). 5. Install washer hose (12) under body hood rail (13) and secure with two clamps (9), washers (10), capscrews (16), washers (10), and nuts (11). TM 9-2320-280-20-3 10-126 Change 1