TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 133 of 1170
10-67. “B” PILLAR REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove twelve locknuts (5), washers (4), capscrews (2), and “B” pillar (1) from body (3). Discard locknuts (5). INITIAL SETUP: Applicable Models M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Twelve locknuts (Appendix G, Item 86) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Soft top removed, if installed (TM 9-2320-280-10). • Soft top door strikers removed, if installed (para. 10-103). • Three point seatbelt removed (para. 10-48 or 10-48.1). b. Installation FOLLOW-ON TASKS: • Install soft top, if removed (TM 9-2320-280-10). • Install soft top door strikers, if removed (para. 10-103). • Install three point seatbelt (para. 10-48 or 10-48.1). TM 9-2320-280-20-3 Change 2 10-111 Install “B” pillar (1) on body (3) with twelve capscrews (2), washers (4), and locknuts (5). Tighten locknuts (5) to 15 lb-ft (20 N•m).