TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 125 of 1170
NOTE TM 9-2320-280-20-3 10-64. BODY HINGE MOUNT REPLACEMENT This task covers: a Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tool kit: M998, M998A1, M1035, M1035A1, M1035A2, automotive (Appendix B, Item 1) M1037, M1038, M1038A1, M1042 only: ● Soft top door removed (TM 9-2320-280-10). Manual References M966, M966A1, M996, M996A1, M1025, M1025A1, TM 9-2320-280-10 M1025A2, M1026, M1026A1, M1043, M1043A1, TM 9-2320-280-24P M1043A2, M1044, M1044A1, M1045, M1045A1, M1045A2, M1046 and M1046A1 only ● Ballistic crew door removed (para. 11-2). Perform step 1 for upper front body hinge removal. 1. Remove two nuts (1), washers (2), twelve-point screws (5), washers (4), and upper front body hinge mount (3) from body (6). NOTE Perform step 2 for lower front body hinge removal. 2. Remove two twelve-point screws (9), washers (8), and lower front body hinge mount (7) from body (6). b. Installation NOTE Perform step 1 for lower and rear body hinge mount installation. 1. Install lower body hinge mount (7) on body (6) with two washers (8) and twelve-point screw (9). Tighten twelve-point screws (9) to 8 lb-ft (11 Nom). NOTE Perform step 2 for upper front body hinge installation. 2. Install upper body hinge mount (3) on body (6) with two washers (4), twelve-point screws (5), washers (2), and nuts (1). Tighten twelve-point screws (5) to 8 lb-ft (11 N-m). FOLLOW-ON TASKS: M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 only ● Install soft top door (TM 9-2320-280-10). M966, M966A1, M996, M996A1, M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1, M1045, M1045A1, M1045A2, M1046 and M1046A1 only: ● Install ballistic crew door (para. 11-2). ● Adjust soft top door (para. 10-102). 10-103