TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 114 of 1170
10-56. CARGO TIEDOWN REPLACEMENT This task covers: a. Removal b. Installation a. Removal NOTE • For removal of rear cargo tiedown, one assistant will be needed. • Early production vehicles will have a capscrew in place of a hex head screw. 1. Remove hex head screw (1) and front cargo tiedown (2) from cargo floor (3). 2. Remove locknut (7), washer (6), hex head screw (4), and rear cargo tiedown (5) from cargo floor (3). Discard locknut (7). INITIAL SETUP: Applicable Models All except M996, M996A1, M997, M997A1, M997A2, M1037, M1042 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Locknut (Appendix G, Item 79) Manual References TM 9-2320-280-24P Personnel Required One mechanic One assistant b. Installation NOTE For installation of rear cargo tiedown, one assistant will be needed. 1. Install front cargo tiedown (2) on cargo floor (3) with hex head screw (1). Tighten hex head screw (1) to 65 lb-ft (88 N . m). 2. Install rear cargo tiedown (5) on cargo floor (3) with hex head screw (4), washer (6), and locknut (7). Tighten locknut (7) to 65 lb-ft (88 N . m). TM 9-2320-280-20-3 10-92 Change 2 2 1 3 3 4 5 6 7 ~