TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 112 of 1170
TM 9-2320-280-20-3 10-90 Change 2 10-55. CARGO BARRIER EXTENSION MAINTENANCE Remove quick release pin (12) from post assembly (4) and remove cargo barrier extension (5) from cargo bulkhead (13). b. Disassembly This task covers: a. Removal c. Assembly b. Disassembly d. Installation Materials/Parts Eight locknuts (Appendix G, Item 86) Manual References TM 9-2320-280-24P INITIAL SETUP: Applicable Models M998, M998A1, M1038, M1038A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) a. Removal 1. Remove screw (6) and lanyard (7) from post assembly (4). 2. Remove twenty-four screws (1), nut and washer assemblies (3), and three backboards (2) from four post assemblies (4). 3. Remove eight locknuts (11), washers (9), capscrews (8), washers (9), and four mounting brackets (10) from cargo bulkhead (13). Discard locknuts (11). c. Assembly 1. Install lanyard (7) on post assembly (4) with screw (6). 2. Install three backboards (2) on post four assemblies (4) with twenty-four screws (1) and nut and washer assemblies (3). 3. Install four mounting brackets (10) on cargo bulkhead (13) with eight washers (9), capscrews (8), washers (9), and locknuts (11). d. Installation Install cargo barrier extension (5) to cargo bulkhead (13) with quick release pin (12). NOTE When installing cargo barrier extension, ensure side rack pins on post assemblies slide into holes of cargo bulkhead.