TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 110 of 1170
10-53. CARGO BULKHEAD REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two capscrews (7), lockwashers (8), washers (9), and cargo bulkhead bracket (10) from cargo floor (11). Discard lockwashers (8). 2. Remove two nuts (1), lockwashers (2), washers (3), capscrews (5), and washers (3) from cargo bulkhead (6) and “B” pillar (4). Discard lockwashers (2). 3. Remove cargo bulkhead (6) from vehicle. 4. Inspect anti-noise pads (12) for damage. Replace if damaged. b. Installation 1. Install cargo bulkhead (6) on cargo floor (11). 2. Install cargo bulkhead (6) on “B” pillar (4) with two washers (3), capscrews (5), washers (3), lockwashers (2), and nuts (1). 3. Install cargo bulkhead bracket (10) on cargo floor (11) with two washers (9), lockwashers (8), and capscrews (7). Tighten capscrews (7) to 65 lb-ft (88 N•m). 4. Tighten nuts (1) to 15 lb-ft (20 N•m). INITIAL SETUP: Applicable Models M998, M998A1, M1038, M1038A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four lockwashers (Appendix G, Item 152) Manual References TM 9-2320-280-24P TM 9-2320-280-20-3 10-88 Change 2 1 2 3 4 3 5 6 7 8 9 11 ~ 10