TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1093 of 1170
E-5. CONVERSION FORMULA TM 9-2320-280-20-3 APPENDIX E (Cont’d) Corrected dial or scale readings are determined by the use of the following formula: NOTE The length of the torque wrench is measured from the center of the handle to the center of the drive. The length of the adapter is measured from the center of the drive to the center of the winch. Example: In this example, the torque wrench measures 22 in. (55.9 cm) and the adapter is 3 in. (7.6 cm). The required torque is 19 lb-ft (25.8 NŽm). E-4