TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 1078 of 1170

TM 9-2320-280-20-3 Change 1 D-105 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) Figure D-113. Test Module Assembly (Cont’d). INSTRUCTIONS (CONT’D): 31. Place electrical insulation sleeving (3) over wire (10) marked 1 on plug connector. 32. Place twenty-four sections of insulation sleeving (3) over connected wires (6) and (11) on LEDs (5) and heat-shrink into position. 33. Install four screws (4) in mount holes (12) on mini-box top section (1) and position four spacers (2) and punch board (7) on screws (4) and secure with four washers (8) and nuts (9). ITEM MATERIALS NO. REQ’D DESCRIPTION NSN/PART NUMBER 2 4 Spacer 313-1437-024 3 25 Insulation Sleeving (install in figure D-110) 5970-00-812-2974 4 4 Screw 5305-00-928-9021 8 4 Washer 5310-00-880-5976 9 4 Nut 5310-00-934-9753