TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1073 of 1170
TM 9-2320-280-20-3 D-100 Change 1 Figure D-112. Punch Board Assembly. Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) ITEM MATERIALS NO. REQ’D DESCRIPTION NSN/PART NUMBER 1 1 Plug Connector 5935-01-230-9304 2 1 Punch Board (fabricated in figure D-99) 64P44EP 3 1 Isolated Resistor Network 13F170 4-6 3 Diode ECG125 7 1 Bussed Resistor Network 13F171 31 Wire (cut in figure D-99) INSTRUCTIONS: 1. Install plug connector (1) on punch board (2). 2. Install fourteen wires to pins (8) marked 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, and 16 on plug connector (1). 3. Install insulated resistor network (3) on punch board (2). 4. Install six wires to pins (8) marked 1, 4, 7, 8, 11, and 14 on isolated resistor network (3). 5. Install bussed resistor network (7) on punch board (2). 6. Install eleven wires to pins (8) marked 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, and 14 on bussed resistor network (7). 7. Install diodes (4), (5), and (6) on punch board (2).