TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1070 of 1170
TM 9-2320-280-20-3 Change 1 D-97 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) Figure D-110. Mini-box Top Section Drill Procedure. INSTRUCTIONS: 1. Locate, mark, and drill thirteen 0.156-in. diameter holes (1) in mini-box top section (4). 2. Locate, mark, and drill six 0.205-in. diameter holes (3) in mini-box top section (4). 3. Locate, mark, and drill four 0.138-in. diameter holes (2) in mini-box top section (4).