Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 1064 of 1170

TM 9-2320-280-20-3 Change 1 D-91 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) Figure D-105. Receptacle Plug and Pin Assemblies (Cont’d). INSTRUCTIONS: 1. Cut fourteen sections of electrical wire (2) to length as shown. 2. Install fourteen receptacle pins (1) on wires (2) as shown. 3. Using fourteen wire markers, mark wires (2) with numbers 1 through 13 and 16 as shown. 4. Install eleven terminal lugs (4) on wires (2) marked 2, 3, 4, 5, 6, 7, 9, 10, 12, 13, and 16 as shown. 5. Install two receptacle pins (1) (without wires) in slotted positions marked 14 and 15 on receptacle plug (5). 6. Install fourteen receptacle pins (1) (with wires connected) in slotted positions marked 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, and 16 on receptacle plug (5).