TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 106 of 1170
10-50. PIONEER TOOL STOWAGE TRAY MAINTENANCE This task covers: a. Disassembly b. Assembly a. Disassembly 1. Remove retainer (1) from pioneer tool stowage tray (14). 2. Remove eight nuts (5), lockwashers (4), screws (2), four footman loops (3), and two strap assemblies (6) from pioneer tool stowage tray (14). Discard lockwashers (4). 3. Remove two nuts (11), lockwashers (10), and two bumpers (13) from tool stowage tray (14). Discard lockwashers (10). 4. Remove four nuts (9), lockwashers (8), capscrews (12), and two latches (7) from pioneer tool stowage tray (14). Discard lockwashers (8). b. Assembly 1. Install two latches (7) on pioneer tool stowage tray (14) with four capscrews (12), lockwashers (8), and nuts (9). Tighten nuts (9) to 16-30 lb-in. (2-3 N•m). 2. Install two bumpers (13) on pioneer tool stowage tray (14) with lockwashers (10) and nuts (11). 3. Install two strap assemblies (6) on pioneer tool stowage tray (14) with four footman loops (3), eight screws (2), lockwashers (4), and nuts (5). Tighten nuts (5) to 16-30 lb-in. (2-3 N•m). 4. Install retainer (1) on pioneer tool stowage tray (14). NOTE • The procedures for disassembly and assembly of pioneer tool stowage trays for all vehicles are basically the same. The tray for M1037 and M1042 has tension latches mounted on angle brackets. • Note position of straps for assembly. INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 135) Twelve lockwashers (Appendix G, Item 178) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Pioneer tool stowage tray removed (TM 9-2320-280-10). TM 9-2320-280-20-3 10-84 Change 2