TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1041 of 1170
TM 9-2320-280-20-3 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont’d) Figure D-89. “C” Pillar Reinforcement Bracket. lNSTRUCTIONS: 1. Cut two pieces of aluminum sheet metal to size as shown. 2. Locate, mark, and drill four 0.125-inch diameter holes in reinforcement brackets (1). 3. Bend left reinforcement bracket (1). 4. Bend right reinforcement bracket (1) in opposite direction. D-68