TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1039 of 1170
TM 9-2320-280-20-3 D-66 Change 1 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) INSTRUCTIONS: 1. Remove left splash shield. (Refer to para. 10-17.) 2. Cut hole (2) in left splash shield (1) as shown. 3. Using fabricated access cover (6) as a template, locate, mark, and drill a 0.312-inch diameter hole (5) through left splash shield (1) as shown. NOTE Existing mounting hardware is used to secure bottom right-hand hole. 4. Secure top two holes of access cover (6) to left splash shield (1) with two NSN 5306-00-225-8499 washers (4), NSN 5306-00-225-8499 screws (7), NSN 5310-00-087-7493 washers (4), and NSN 5310-00-814-0673 nuts (3) as shown. 5. Install modified left splash shield. (Refer to para. 10-17.) Figure D-87. Left Splash Shield. LEFT SPLASH SHIELD SPLASH SHIELD CUT MANUFACTURED FROM PART NUMBER (INCHES) PART NUMBER 12446771 AS SHOWN 12340361