TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1038 of 1170
TM 9-2320-280-20-3 Change 1 D-65 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) INSTRUCTIONS: 1. Cut aluminum sheet metal to size as shown. 2. Locate, mark, and drill two .313-.375-in. diameter holes in left splash shield access cover as shown. 3. Locate, mark, and drill one .406-.466-in. diameter hole in left splash shield access cover as shown. 4. Remove all burrs and sharp edges. 5. Paint left splash shield access cover as required. (Refer to TM 43-0139.) Figure D-86. Left Splash Shield Access Cover. MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICIATION 10 X 12-FT SHEET. ALUMINUM ALLOY IAW QQ-A-225/8 0.08 IN. THICK 6061-T6 LEFT SPLASH SHIELD ACCESS COVER ACCESS COVER CUT TO SIZE MANUFACTURED FROM PART NUMBER (INCHES) NSN 12446770 AS SHOWN 9530-01-071-2140