TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1021 of 1170
TM 9-2320-280-20-3 D-48 Change 1 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) INSTRUCTIONS: 1. Cut steel to lengths as shown. 2. Weld flat steel and round steel together at angle as shown. 3. Forked end (dimension F) must fit behind hex-head of glow plug. Thickness may have to be ground down from .125 inch to .0625 inch to insure proper fit. GLOW PLUG TOOL ITEM CUT MANUFACTURED FROM NO. LENGTH PART NUMBER (FSCM) (INCHES) 1 as shown 9515-00-204-3994 2 as shown 9510-00-189-0652 MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICATION 1. .125 IN. THICK FLAT STEEL N/A 2. .375 IN. DIAMETER ROUND STEEL N/A Figure D-63.1. Glow Plug Tool Assembly. DIMENSIONS: A. 7-1/2” F. 11/32” B. 5-1/2” G. 45° C. 2” H. 1/8” Flat Steel D. 1/2” I. 3/8” Rod E. 3/4”